Your username:

Your password:

X

The item was added to the basket

Browse the site by

Product type

Manufacturer

Home > Electronics > Transmitters > 2,4GHz > FF-10 (T10C) R6014HS 2.4 GHz

FF-10 (T10C) R6014HS 2.4 GHz - 2,4GHz

Fully expanded ten-channel computer system of superior quality, with 2.4 GHz FASST technology. The FASST system is a Spread Spectrum system with frequency hopping (FHSS), and is therefore permitted to transmit a maximum power of 100 mW EIRP. This gives it adequate reserves even for large-scale model aircraft and jets.
view manufacturers description
FF-10 (T10C) R6014HS 2.4 GHz - 2,4GHz
Availability Per Order Shipment within 30 days?
MS Composit Price (inc. VAT) €638,82
Add to basket
FF-10 (T10C) R6014HS 2.4 GHz - 2,4GHz features:
  • Frequency band: 2,4 GHz
  • Current drain: 230 mA
  • Power supply: 9,6 Volt NiMH-Akku
  • Transmission system: FASST
MS Composit Rating: None  
Review
None
 details »

Quickfind code F7032
Back to top

FF-10 (T10C) R6014HS 2.4 GHz recommended accessories (not included in the kit)


ADAPTER CABLE FLIGHT SIMULATOR FF-9
 ADAPTER CABLE FLIGHT SIMULATOR FF-9 8239 None Available in Shipment within 15 days? €15,29 (inc. VAT)
For connecting the FF-9 to a PC flight simulator.
Length approx. 20 cm.
 

CAMPAC-MODUL 16X64K
 CAMPAC-MODUL 16X64K 8321 None Available in Shipment within 15 days? €140,78 (inc. VAT)
The new 16 x 64k CAMPac offers 64k of memory on each of 16 levels.
 

TRAINER CORD FF-9
 TRAINER CORD FF-9 F1591 None Available in Shipment within 10 days? €21,96 (inc. VAT)
For two FF-9 transmitters. Length approx. 2 metres.
 

RECEIVER CHARGE LEAD BANA.
 RECEIVER CHARGE LEAD BANA. F1416 None In stock €5,88 (inc. VAT)
Receiver battery charge lead
 

CHARGING CABLE BANANA /SM.
 CHARGING CABLE BANANA /SM. F1415 None In stock €3,92 (inc. VAT)
Transmitter charge lead, Banana plugs / NES-J plug, 100 cm long, Pack of 1
 

ALU.TRANSMITTER Aero Team
 ALU.TRANSMITTER Aero Team F1556 None Available in Shipment within 10 days? €58,43 (inc. VAT)
Low-profile aluminium case suitable for all current robbe-Futaba transmitters. Features printed AERO-TEAM logo.
 

TRAINER CORD FF-9 -> F 3,5
 TRAINER CORD FF-9 -> F 3,5 8238 None In stock €27,06 (inc. VAT)
FF-9 to F-series transmitters with Trainer 4 module.
Length approx. 2 metres.
 

TRAINER CABLE FF-9 -> FX 2.5MM
 TRAINER CABLE FF-9 -> FX 2.5MM 8236 None In stock €23,14 (inc. VAT)
FF-9 to FX-series transmitters.
Length approx. 2 metres.
 

NECKSTRAP 1 POINT
 NECKSTRAP 1 POINT F1550 None Available in Shipment within 10 days? €11,37 (inc. VAT)
Soft, variable-length neckstrap, with spring hooks and swivels. Fits Attack, F-14, FC-16, FF3, FF8 and Skysport 4 transmitters.
Back to top

FF-10 (T10C) R6014HS 2.4 GHz user reviews

Back to top

FF-10 (T10C) R6014HS 2.4 GHz manufacturers description

  • No crystals, no spot frequency selection, maximum security from same-channel interference.
  • Virtually interference-free due to Spread Spectrum modulation, frequency hopping and encoding from transmitter to receiver using more than 130 million codes.
  • Please see the FASST introduction page for a detailed description of the advantages of 2.4 GHz FASST technology.
  • Focal point of the transmitter is the large, high-resolution 160 x 72 dot graphic screen with extra-large dots for good legibility. All
    • settings are entered and displayed using the screen itself. The system is very simple to program using the four control buttons, the 3-D hotkey and the graphical user interface.
  • New precision dual-axis stick units with digital trims and variable trim increments eliminate the need to make trim adjustments or store trim values when you switch model memories. The trim values are displayed on the LCD screen in bar graph form.
  • The side-mounted rotary controls provide a practical means of operating supplementary functions without letting go of the primary sticks.
  • The transmitter is fully expanded as standard, with five analogue rotary controls and eight switches; no additional accessories are required. The switches and other transmitter controls can be assigned to virtually any function.
  • New feature: logical switch function for switches and sticks.
  • Comprehensive software provides all the essential facilities even for power models, gliders and helicopters with extensive functions.
  • Plenty of freely programmable mixers are available with up to 5-point curves for setting up very complex mixer functions.
  • The transmitter can also operate in FM or PCM transmission mode; the FM-TW 10 RF module is required for this. It is then compatible with all current FM and PCM-1024 receivers in the robbe/Futaba range.
  • In FASST 2.4 GHz mode the system offers a total of ten channels (eight proportional, two switched channels). The software is available in six languages: German, English, French, Italian, Spanish and Dutch.
  • Integral H3 (1:1:1) swashplate mixer for CCPM rotor head control (140°), plus H4X for 45° swashplate rotation.
  • Integral Trainer system with individual function transfer.
  • With charge socket, i.e. prepared for use with rechargeable batteries.
  • The stick units are designed for Universal mode, and can be converted by the user from "throttle right" to "throttle left".
  • Fifteen internal model memories, with infinite expansion using CAMPac modules:
    • 4k CAMPac module = 1 model
    • 16k CAMPac module = 4 models
    • 64k CAMPac module = 16 models
    • 16 x 64k CAMPac module = 256 models

Kit contents:
  • 1 T10C FASST transmitter, 2.4 GHz
  • 1 Transmitter battery, 9.6 Volt / 2000 mAh
  • 1 TM10 FASST RF module
  • 1 R 6014HS FASST receiver
  • 1 Switch harness with charge socket